Melt Pressure Transducers - Authorized Distributor

OUTPUT SIGNAL

4...20mA

CONFIGURATION VERSION

Rigid stem

Rigid stem + flexible

With thermocouple

Exposed tip

CONNECTOR

6 pin

8 pin

ACCURACY CLASS

0.25% FSO (ranges ≥ 100 bar/1500 psi)

0.5% FSO

THREAD

Standard - 1/2 - 20 UNF

Standard - M18 x 1.5

Available on request - M10 x 1 (ranges ≥200bar / 3000psi)

Available on request - M14 x 1.5

RIGID STEM LENGTH (mm / inches)

Standard (MX0, MX1, MX2) - 153mm - 6"

Standard (MX0, MX1, MX2) - 318mm - 12.5"

Standard (MX3) - none

Available on request - 38mm - 1.5" 1)

Available on request - 50mm - 2" 1)

Available on request - 76mm - 3" 1)

Available on request - 350mm - 14"

Available on request - 400mm - 16"

Available on request - 456mm - 18"

1) use rod MX1 and MX2 in combination with sheathings
or rigid rods so that total length L is ≥ 630mm

CLASS T4 / T5

NOTES: Series MX0 available
only in T4 class

Standard version

Special or customized versions
available on request

Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Extensimetric measurement principle with Wheatstone bridge
Precision: <±0.25% FSO (H); <±0.5% FSO (M)
Calibration signal 80% FSO internally generated
Completely interchangeable with all existing products
Protection level: IP65 (6-pin connector)
Standard threading 1/2-20 UNF, M18x1.5, other versions on request
Stainless steel diaphragm 15-5 PH with armoloy coating
For ranges below 100 bar-1500 psi:
17-7 PH corrugated stainless steel diaphragm with TiN (Titanium Nitride) coating
Other diaphragm types available on request

© 1996 - Nordic Sensors Industrial Inc. - All Rights Reserved. The materials on this website are protected by copyright and other laws. Please visit our other sites:
Nordic Sensors Inc. - Thermocouples - Ceramic Band Heaters - Mica Band Heaters - Cartrige Heaters - Solenoid and Pneumatic Valves

MX Melt pressure transmitters for applications in potentially explosive atmospheres